IBM eServer 220 xSeries Installation Manual

Also see for 220: Service guide Configuration and options guide Hardware Maintenance Manual

Contents

Chapter 5. Solving problems 43POST error messagesThe following table provides an abbreviated list of the error messages that mightappear during POST.Note: Refer to the User’s Reference on the IBM xSeries Documentation CD for moredetailed information about POST error messages.POST message Failing device or problem found Suggested action129 L1 cache of a microprocessor Check the installation of your microprocessors.162 Change in device configuration Verify that your optional devices are turned on andinstalled correctly.163 Time of day has not been set Set the correct date and time.164 Change in memory configuration Verify that your memory is installed properly; then, restartthe server and run the Configuration/Setup Utilityprogram.201 Change in memory configuration Verify that your memory is fully seated and installedproperly.229 L2 cache of a microprocessor Check the installation of your microprocessors.289 Failing DIMM was disabled Verify that your memory is correct for your server and thatit is installed properly.301303Keyboard and keyboard controller Ensure that the keyboard cable is connected and nothing isresting on the keyboard keys.962 Parallel port configuration error Start the Configuration/Setup program and verify that theparallel-port setting is correct.11xx Serial port error Verify that the serial cable is connected correctly.1162 Serial port configuration conflict Start the Configuration/Setup program and ensure that theIRQ and I/O port assignments needed by the serial port areavailable.1601 BIOS update needed Download and install the latest system BIOS level.1800 PCI adapter hardware interrupt Start the Configuration/Setup program and verify that theinterrupt resource settings are correct.24002462Video controller and memory Verify that the monitor is connected correctly.00019xxx Processor x is not functioning orfailed the built-in testVerify that processor x is installed correctly. If the problemremains, replace processor x.00180xxx A PCI adapter requested a resourcethat is not availableStart the Configuration/Setup program and ensure that theresources needed by the PCI adapter are available.012980xx012981xxData for processor x Download and install the latest system BIOS level.01298200 Microprocessor speed mismatch Install microprocessors with identical speeds.I9990305 POST could not find an operatingsystem.Install your operating system.Table 4. Abbreviated list of POST error messages