IBM eServer 220 xSeries Installation Manual

Also see for 220: Service guide Configuration and options guide Hardware Maintenance Manual

Contents

62 IBM® xSeries 220: Installation GuideTaiwan electrical emission statementJapanese Voluntary Control Council for Interference(VCCI) statementPower cordsFor your safety, IBM provides a power cord with a grounded attachment plug to usewith this IBM product. To avoid electrical shock, always use the power cord and plugwith a properly grounded outlet.IBM power cords used in the United States and Canada are listed by Underwriter’sLaboratories (UL) and certified by the Canadian Standards Association (CSA).For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified cordset consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord, amaximum of 15 feet in length and a parallel blade, grounding-type attachment plugrated 15 amperes, 125 volts.For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and CSA-certified cord set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductorcord, a maximum of 15 feet in length and a tandem blade, grounding-type attachmentplug rated 15 amperes, 250 volts.For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with agrounding-type attachment plug. The cord set should have the appropriate safetyapprovals for the country in which the equipment will be installed.IBM power cords for a specific country or region are usually available only in thatcountry or region.