IBM eServer 220 xSeries Installation Manual

Also see for 220: Service guide Configuration and options guide Hardware Maintenance Manual

Contents

Appendix A. Product warranties and notices 61instruction manual, may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmfulinterference, in which case the user will be required to correct the interference at hisown expense.Properly shielded and grounded cables and connectors must be used in order to meetFCC emission limits. IBM is not responsible for any radio or television interferencecaused by using other than recommended cables and connectors or by unauthorizedchanges or modifications to this equipment. Unauthorized changes or modificationscould void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.Industry Canada Class A emission compliancestatementThis Class A digital apparatus complies with Canadian ICES-003.Avis de conformité à la réglementation d'Industrie CanadaCet appareil numérique de classe A est conforme à la norme NMB-003 du Canada.Australia and New Zealand Class A statementAttention: This is a Class A product. In a domestic environment this product maycause radio interference in which case the user may be required to take adequatemeasures.United Kingdom telecommunications safetyrequirementNotice to CustomersThis apparatus is approved under approval number NS/G/1234/J/100003 forindirect connection to public telecommunication systems in the United Kingdom.European Union EMC Directive conformance statementThis product is in conformity with the protection requirements of EU CouncilDirective 89/336/EEC on the approximation of the laws of the Member States relatingto electromagnetic compatibility. IBM cannot accept responsibility for any failure tosatisfy the protection requirements resulting from a nonrecommended modification ofthe product, including the fitting of non-IBM option cards.This product has been tested and found to comply with the limits for Class AInformation Technology Equipment according to CISPR 22/European Standard EN55022. The Limits for Class A equipment were derived for commercial and industrialenvironments to provide reasonable protection against interference with licensedcommunication equipment.Attention: This is a Class A product. In a domestic environment this product maycause radio interference in which case the user may be required to take adequatemeasures.