Installation guidelinesUse this information for installation.Attention: Static electricity that is released to internal server components whenthe server is powered-on might cause the system to halt, which might result in theloss of data. To avoid this potential problem, always use an electrostatic-dischargewrist strap or other grounding system when removing or installing a hot-swapdevice.Before you install optional devices, read the following information:v Read the safety information in “Safety” on page vii, the guidelines in “Workinginside the server with the power on” on page 35, and “Handling static-sensitivedevices” on page 36. This information will help you work safely.v Make sure that the devices that you are installing are supported. For a list ofsupported optional devices for the server, see http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/.v When you install your new server, take the opportunity to download and applythe most recent firmware updates. This step will help to ensure that any knownissues are addressed and that your server is ready to function at maximumlevels of performance. To download firmware updates for your server, go tohttp://www.ibm.com/support/fixcentral/.Important: Some cluster solutions require specific code levels or coordinatedcode updates. If the device is part of a cluster solution, verify that the latest levelof code is supported for the cluster solution before you update the code.Figure 19. System-board optional-device connectorsChapter 2. Installing optional devices 33
