IDS 816 Installer Manual

Also see for 816: User manual User manual

IDS 816 Installer Manual Manual pdf 41 page image

IDS 816 700-283-02I Issued September 200941Data entered Explanation[INSTALLER CODE][*] To enter program mode[1][2][1][*] To enter location 121 (phone number 1)[MODE][0] To dial the zero[MODE][5] This programmes the 4 second pause[MODE][0][3][1] This programmes the area code[7][MODE][0][5][1][3][7][3] The remainder of the number[0] To mark the end of the number[#] To exit program mode11.2 Telephone Number Storage LocationsLOCATION 121 Phone Number 1This location contains the primary telephone number. A maximum of 24 digits can be entered. Enter thedigits consecutively and after the last digit has been entered, terminate with a [0].LOCATION 122 Phone Number 2This location contains the secondary telephone number. A maximum of24 digits can be entered. Enter the digits consecutively and after the last digit has been entered,terminate with a [0].11.3 Download OptionsLOCATION 123 Download OptionsLED ON / OFF Action1 ON Enable fax defeatOFF Disable fax defeat2 ON Enable forced answerOFF Disable forced answer3 ON Enable auto pickupOFF Disable auto pickup4 ON Enable call-backOFF Disable call-backDefault values are shadedFax defeat is useful for downloading when a fax or answering machine is connected to the same phoneline as the alarm panel. If this feature is enabled, dial the panel and hang up before three rings. Dial thepanel again within one minute. The panel will then pick up the call on the first ring thereby preventing thefax / answering machine from answering the call before the alarm.If forced answer is enabled the [8] key may be used to force the panel to go off hook,“answering the line”.If enabled, Auto Pickup will pick up the line after the number of rings programmed into location124.The Call-back feature when enabled, allows the download software/PC to request that thepanel call it back using the phone number as programmed into location 125.