IDS 816 Installer Manual

Also see for 816: User manual User manual

IDS 816 Installer Manual Manual pdf 48 page image

IDS 816 700-283-02I Issued September 2009 4813. User OptionsLOCATIONS 136 – 167 Individual User Code SetupThe IDS 816 provides for 32 user codes. These locations allow the installer to configure the user codeproperties.Table 11 : User Code LocationsLoc Number User Number Loc Number User Number136 User 1 152 User 17137 User 2 153 User 18138 User 3 154 User 19139 User 4 155 User 20140 User 5 156 User 21141 User 6 157 User 22142 User 7 158 User 23143 User 8 159 User 24144 User 9 160 User 25145 User 10 161 User 26146 User 11 162 User 27147 User 12 163 User 28148 User 13 164 User 29149 User 14 165 User 30150 User 15 166 User 31151 User 16 167 User 32When the panel is defaulted, User Code 1 defaults to 1234 and is a Master User Code. All other UserCodes are disabled.Sub-location 1 Assigned to PartitionsThis bitmapped sub-location determines which partition a user code is assigned to. By default, UserCode 1 is assigned to Partitions 1 and 2. All other User Codes are assigned to Partition 1 only.(Depending on sub-location 2, bit 1). Change partitions by holding [MODE] for 1 second, [2] [*], in usermode – provided that the keypad is Global. (Sub-location 2, bit 4).LED PartitionLED 1 Partition oneLED 2 Partition twoSub-location 2 User Code PropertiesThis is a bitmapped sub-location.LED User Option1 Master user2 Duress code3 Arm to disarm code (maid’s code)4 Global Arm/Disarm