123FREQUENCY AND CHANNEL SETTING3■ Selecting a memory channelqPush [V/M] ( SKIP • S . MW ) momentarily to select memorymode.• “ ” appears when a memory channel is selected.w Rotate [DIAL] to select the desired memory channel.• Only programmed memory channels can be selected.• While pushing and holding [FUNC], rotate [DIAL] to select amemory channel in 10 channel steps, blank channels can be se-lected in this case.■ Selecting a call channelqPush [CALL] ( MODE • SCAN ) momentarily to select a callchannel.wRotate [DIAL] to select the desired call channel.ePush [CALL] ( MODE • SCAN ) or [V/M] ( SKIP • S . MW ) momen-tarily to return to the previously selected mode.ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519144 MHz band 440 MHz band• Call channel example (depends on version)SCANS.MWSETSCAN[DIAL]SCANS.MWSETATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519[DIAL][DIAL] changes the mem-ory channel.S.MWPush Push and hold Dual operation