Icom IC-P7A Instruction Manual

Also see for IC-P7A: Instruction manual

Contents

276 MEMORY/CALL CHANNELS■ Programming memory/bank nameEach memory channel can be programmed with an alphanu-meric channel name for easy recognition and that can be indi-cated independently by channel. Names can be a maximum of6 characters.q Push [V/M] (SKIP •S.MW) to select memory mode.w Rotate [DIAL] to select the desired memory channel.ePush and hold [V/M] (SKIP •S.MW) for 1 sec. to enter selectmemory write mode.• 1 short and 1 long beep sound.• “ ” indicator and memory channel number blink.rWhile pushing and holding [CALL] ( MODE • SCAN ), rotate[DIAL] to select “M NAME” or “B NAME” when program-ming the memory name or the bank name, respectively.• Name type can also be selected by pushing [CALL](MODE •SCAN ) several times.• After releasing [CALL] (MODE •SCAN ), an under bar blinks for thefirst digit instead of the frequency indication, and only “ ” indi-cator blinks.tWhile pushing and holding [FUNC], rotate [DIAL] to selectthe desired character.• The selected character blinks.y Rotate [DIAL] to move the cursor to left or right.uRepeat steps t and y until the desired 6-character chan-nel names are displayed.iPush [CALL] (MODE •SCAN ) several times, or rotate [DIAL]while pushing and holding [CALL] ( MODE • SCAN ) to select“S.MW.”oPush and hold [V/M] (SKIP •S .MW) for 1 sec. to program thename and exit the channel name programming.• 3 beeps sound.• Available charactersA to Z, 0 to 9, (, ), ✱, +, –, ., /, :, = and space.ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519Bank nameMemory nameATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIP MR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519Bank name selectionMemory name selectionATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519