Icom IC-P7A Instruction Manual

Also see for IC-P7A: Instruction manual

Contents

6311 OTHER FUNCTIONS■ Auto power-off functionThe IC-P7A can be set to automatically turn OFF after a spec-ified period in which no operation is performed.120 min., 90 min., 60 min., 30 min. and OFF can be specified.The specified period is retained even when the transceiver isturned OFF by the auto power-off function. To cancel thefunction, select “OFF” in step e below.qWhile pushing and holding [FUNC], push and hold[SQL] (ATT•SET) for 1 sec. to enter set mode.w Rotate [DIAL] to select “AP OFF.”• Turn the expanded set mode ON for selection. (p. 39)eWhile pushing and holding [FUNC], rotate [DIAL] to selectthe desired time or to turn the function OFF.r Push [SQL] (ATT•SET) to exit set mode.■ TV channel operationTV channel operation is available only when TV channels are pro-grammed using the optional CS-P7 CLONING SOFTWARE. (p. 61)D TV channel receivingq Push [V/M] (SKIP •S .MW) to select VFO mode, if necessary.w Push [BAND] ( TS • LOCK ) several times to select the TVchannel band.• “tV” and channel number appear.• While pushing and holding [BAND] ( TS • LOCK ), rotating [DIAL]also selects the TV channel band.e Rotate [DIAL] to select the desired channel.• While pushing and holding [FUNC], rotating [DIAL] selects theall channels including skip channel.D Skip channel settingUnwanted channels can be skipped for rapid selection, etc.q Rotate [DIAL] to select the channel to be skipped.• To clear the skip setting, rotate [DIAL] while pushing and holding[FUNC] to select a skip channel.w While pushing and holding [FUNC], push [V/M](SKIP •S.MW) to toggle the skip setting ON and OFF.• “SKIP” appears when the channel is set as skip channel.D Automatic TV channel programmingTV channels can be programmed automatically.➥ Push and hold [CALL] (MODE •SCAN ) for 1 sec. to start TVchannel programming.• The programming will automatically stop when scanning allchannels.SCANS.MWSETATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519After 1 sec.SET[DIAL]USING EXPANDED SET MODE