205REPEATER OPERATION5When communicating through a repeater, the transmit fre-quency is shifted from the receive frequency by the amount ofthe offset frequency.qWhile pushing and holding [FUNC], push and hold[SQL] (ATT•SET) for 1 sec. to enter set mode.wRotate [DIAL] to select “OFFSET.”eWhile pushing and holding [FUNC], rotate [DIAL] to set thedesired offset frequency within 0.000–159.995 MHz range.• The tuning step, selected in VFO mode, is used for setting.r Push [SQL] (ATT•SET) to exit set mode.ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519After 1 sec.Offset frequency item Setting indicationSCANS.MWSET[DIAL]SET■ Offset frequencyPush Push and hold Dual operation
