Icom IC-R6 Instruction Manual

Also see for IC-R6: Price list Instruction manual Instruction manual Service manual

Icom IC-R6 Instruction Manual Manual pdf 31 page image

185MEMORY CHANNELS45■ General descriptionThe receiver has 1300 memory channels for storage ofoften-used frequencies. A total of 22 memory banks, A to R,T, U, W and Y can be selected. Up to 100 channels can beassigned to each bank.D Memory channel contentsThe following information can be programmed into memorychannels:• Receive frequency (p. 11)• Receive mode (p. 14)• Duplex direction (+DUP or –DUP) with a frequency off-set (p. 16)• Tone squelch or DTCS squelch ON/OFF (p. 43)• Tone squelch frequency or DTCS code with polarity(pp. 41, 42)• Tuning step (p. 11)• Attenuator function ON/OFF (p. 15)• Voice squelch control ON/OFF (p. 52)• AF filter ON/OFF (p. 55)• Scan skip setting (p. 35)• Memory bank (p. 20)• Memory name (p. 22)■ Selecting a memory channelq Push [V/M] to select the memory mode.• Push [V/M] to toggle between the VFO mode and the memorychannel mode.w Rotate [DIAL] to select a desired memory channel.• Only programmed channels are displayed.• While holding down [FUNC], rotate [DIAL] to select the memorychannel in 10 channel steps.AppearsRotate [DIAL] to selectthe memory channel.NOTE: Memory data can be erased by static electricity,electric transients, etc.In addition, it can be erased by a malfunction and duringrepairs. Therefore, we recommend that memory data bewritten down or saved to a PC using the CS-R6 cloningsoftware.