Icom IC-R6 Instruction Manual

Also see for IC-R6: Price list Instruction manual Instruction manual Service manual

Icom IC-R6 Instruction Manual Manual pdf 74 page image

6110 OTHER FUNCTIONSNew2001■ Data cloningCloning allows you to quickly and easily transfer the pro-grammed contents from one receiver to another; or data froma personal computer to a receiver, using the optional CS-R6cloning software and the appropriate cloning cable.DCloning between receiversq Connect the OPC-474 cloning cable to the [SP] jack of themaster and sub-receivers.• The master receiver is used to send data to the sub-receiver.to [SP]MasterreceiverSubreceiverto [SP]NOTE: DO NOT push any key on the sub-receiver duringcloning. This will cause a cloning error.w Hold down [V/M] of only the master receiver, and thenturn it ON. For the sub-receiver, simply turn it ON. (Seebelow for more information.)“CLONE” and “m” appearwhen entered the cloningmode.Master receiver✔ CLONING MODE ENTRY (except Master receiver):When the CI-V baud rate (p. 56) is selected any other than“9600” or “AUTO,” the following operations are required.q Turn the receiver’s power OFF.w While holding down [MODE], push and hold [ ] for 1 sec-ond to enter the cloning mode.