Icom IC-R6 Instruction Manual
Also see for IC-R6: Price listInstruction manualInstruction manualService manual
                                                                                                | |
Contents
| 
235 MEMORY CHANNELSNew2001■ Selecting display typeDuring memory mode operation, either the programmedbank name, memory name or the channel number can bedisplayed, instead of the frequency display.q Push [V/M] to select the memory mode.• If desired, push [BAND] repeatedly to select a desired bankgroup.w While holding down [FUNC], push [M.N](BAND) repeat-edly to select the display type from frequency, bank name,memory name or the channel number.[DIAL]Frequency displayBank name displayMemory name displayChannel number displayD Selecting bank channel displayDuring bank channel operation, the bank channel numbercan also be displayed, instead of the memory channelnumber.q Select the channel number display as described to theleft.w While holding down [BAND], rotate [DIAL] to select adesired bank.• The bank can also be selected by pushing [BAND] repeatedly.PushMemory channelnumber displayBank channelnumber displayBank channelnumber displayAuto write channelnumber displayW h e n t h e s e l e c t e dmemor y channel hasnot been programmedw i t h t h e b a n k n a m eor memory name, thefrequency is displayed. |
Related manuals for Icom IC-R6
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine