Icom IC-R6 Instruction Manual

Also see for IC-R6: Price list Instruction manual Instruction manual Service manual

Icom IC-R6 Instruction Manual Manual pdf 37 page image

245MEMORY CHANNELSNew20015■ Copying memory contentsThis function copies a memory channel’s contents to the VFO(or another memory channel). This is useful when searching forsignals around a memory channel frequency and for recallingthe frequency offset, subaudible tone frequency etc.D MemoryVFOq Select the memory channel to be copied.➥ Push [V/M] to select the memory mode, then rotate[DIAL] to select a desired channel.• If desired, push [BAND] repeatedly to select a desired bankgroup, then rotate [DIAL] to select a desired bank channel.w Hold down [S.MW](V/M) for 1 second to enter the selectmemory write mode.• 1 short and 1 long beep sounds.• The “ ” icon and memory channel number blink.e Rotate [DIAL] to select “VF.”r Hold down [S.MW](V/M) for 1 second to write the selectedchannel contents into the VFO.• The VFO mode is automatically selected.Holding down [S.MW](V/M) for 2 seconds in step w willalso copy the memory contents to the VFO. In that case,steps e and r are not necessary.D Memorymemoryq Select the memory channel to be copied.➥ Push [V/M] to select the memory mode, then rotate[DIAL] to select a desired channel.w Hold down [S.MW](V/M) for 1 second to enter the selectmemory write mode.• 1 short and 1 long beep sounds.• The “ ” icon and memory channel number blink.• Do not hold down [S.MW](V/M) for more than 2 seconds.Otherwise the memory contents will be copied to the VFO.e Rotate [DIAL] to select the target memory channel.r Hold down [S.MW](V/M) for 1 second again to copy.Rotate .Hold down for 1 sec. Hold down for 1 sec. to program.Select the memory channel[EXAMPLE]: Copying channel 20 to 51.