Icom IC-R6 Instruction Manual

Also see for IC-R6: Price list Instruction manual Instruction manual Service manual

Icom IC-R6 Instruction Manual Manual pdf 76 page image

6310 OTHER FUNCTIONSNew2001■ Partial resetIf you want to initialize the operating settings (VFO fre-quency, VFO settings, Set mode contents) without clearingthe memory contents, a partial reset of the receiver can bedone.➥ While holding down [FUNC] and [TS], turn the power ONto partially reset the receiver.■ All resetThe function display may occasionally display erroneousinformation (e.g. when first applying power). This may becaused externally by static electricity or by other factors.If this problem occurs, turn power OFF. After waiting a fewseconds, turn power ON again. If the problem persists, per-form the following procedure.• Partial resetting is also available. See the details to the left.IMPORTANT:Resetting the receiver CLEARS all memory informationand initializes all values in the receiver.The preprogrammed (depending on the receiver version)memory information is also cleared.➥ While holding down [FUNC] and [V/M], turn the powerON to reset the CPU.*The displayed frequencydiffers, depending on thereceiver version.