New2001qwiR6� VFO and memory mode selectionPOCKET GUIDEPush [V/M] to toggle between theVFO and the memory mode.�� Receive mode selectionPush [MODE] repeatedly toselect a desired mode.�� Audio level settingPush [Y] to increase the audiolevel, push [Z] to decrease it.�� Squelch level settingWhile holding down [SQL],rotate [DIAL] to set the squelchlevel.�� Frequency band selectionPush [BAND] repeatedly, or holddown [BAND], rotate [DIAL] toselect a desired frequency band.�� Tuning step selectionPush [TS], then rotate [DIAL] toselect a desired tuning step.• Push [TS] again to return to theprevious screen.�� Key lock functionWhile holding down [FUNC], push[ ](BAND) for 1 sec. to togglethe key lock function ON or OFF.• “ ” appears when the lock functionis in use.�� Frequency settingPush [V/M] to select the VFOmode.Rotate [DIAL] to set a desiredreceive frequency.qw� Memory channel selectionPush [V/M] to select thememory mode.Rotate [DIAL] to set a desiredmemory channel.• While holding down [FUNC], rotate[DIAL] changes the memorychannel in 10 channel steps.qwe� Memory bank channel selectionPush [V/M] to select thememory mode.Push [BAND] repeatedly, orwhile holding down [BAND],rotate [DIAL] selects a desiredbank.Rotate [DIAL] to select adesired bank channel.� Attenuator functionWhile holding down [FUNC],push [ ](SQL) to toggle theattenuator ON or OFF.• “ATT” appears when the attenua-tor function is in use.�8016POCKET GUIDEImportant operating instructions are summed up on this and the followingpage for your simple reference.By cutting along the line and folding on the dotted line, it will become acard sized operating guide which can easily be carried in a card case orwallet, etc.q Cut w Fold e Complete