Icom IC-T2H Instruction Manual

Also see for IC-T2H: Service manual Instruction manual

Versions of the IC-T2H which display the “CE” symbolon the serial number seal, comply with the ETSI specifi-cation prETS300 684 (EMC product standard for Com-mercially Available Amateur Radio Equipment).PORTANTAD ALL INSTRUCTIONS carefully and com-tely before using the transceiver.VE THIS INSTRUCTION MANUAL—This in-uction manual contains important operating instructions forIC-T2H.XPLICIT DEFINITIONSe explicit definitions below apply to this instruction manual.CAUTIONSRWARNING! NEVER hold the transceiver so that theantenna is very close to, or touching exposed parts of thebody, especially the face or eyes, while transmitting. Thetransceiver will perform best if the microphone is 5 to 10 cm(2 to 4 in) away from the lips and the transceiver is vertical.RWARNING! NEVER operate the transceiver with aheadset or other audio accessories at high volume levels.Hearing experts advise against continuous high volume op-eration. If you experience a ringing in your ears, reduce thevolume or discontinue use.NEVER connect the transceiver to an AC outlet or to apower source of more than 16 V DC. Such a connection willdamage the transceiver.NEVER connect the transceiver to a power source that isDC fused at more than 5 A. Accidental reverse connection willbe protected by this fuse, higher fuse values will not give anyprotection against such accidents and the transceiver will beruined.NEVER attempt to charge alkaline or dry cell batteries. Be-ware that external DC power connections will charge batteriesinside the battery case. This will damage not only the batterycase but also the transceiver.WORD DEFINITIONWARNING Personal injury, fire hazard or electricshock may occur.CAUTION Equipment damage may occur.NOTE If disregarded, inconvenience only. No riskof personal injury, fire or electric shock.01.12.5 4:31 PM Page ii (1,1)