Icom IC-T2H Instruction Manual

Also see for IC-T2H: Service manual Instruction manual

0 OTHER FUNCTIONSASSIGNABLE FUNCTIONSULLacklight (LIGHT)ower output ([H/L])can start/stop ([SC])TMF memory* 1 (DTMF)TMF re-dial (RE-DIAL)ock function ([D L])eep tones (BEEP)FO/memory ([A V])one setting ([C T])one scan (T SCAN)uning step (TS)quelch level ([SQL])X channels*2 (WX)NI code*3 (ANI CODE)uplex setting ([DUP])emory write ([B M])all channel (CALL)hift (SHIFT)DISPLAY READOUT DESCRIPTIONNo function.Toggles display backlighting on/off.Toggles high and low power output.Starts and stops the scan function.Selects a DTMF memory.Redials the last-used DTMF code.Toggles the lock function on/off.Toggles confirmation beep tones on/off.Toggles between VFO and memory modes.Toggles tone squelch operation on/off.Starts/stops tone scan.Selects a tuning step for frequency selection.Selects a squelch level.Selects a weather channel.Selects an ANI code.Selects +duplex, –duplex or simplex operation.Writes the selected frequency into a memory.Selects the call channel.Shifts the CPU’s clock frequency.he DTMF memory function can only be assigned to [SQL], [SC], [DUP] or [H/L]. *2Weather channels are only available in the USA version.NI code setting only appears when ANI operation is selected through cloning (p. 36).01.12.5 4:31 PM Page 32 (1,1)