Icom IC-T2H Instruction Manual

Also see for IC-T2H: Service manual Instruction manual

SCAN OPERATIONROGRAMMED SCANanddge BandedgeScanJumpScan edgesPA PbEMORY (SKIP) SCANSKIPSKIPMch 1 Mch 7Mch 2 Mch 4Mch 3 Mch 5 Mch 6Mch 8Mch 40 Mch 11 Mch 10 Mch 9Scan types D Scan resume conditionWhen a signal is received dur-ing scanning, the scan resumecondition determines what ac-tion the transceiver takes. TheIC-T2H has 2 scan resumeconditions available as illus-trated at right. Use initial setmode to select the one whichbest suits your needs.➀ While pushing [8] + [0], turn power on to enter initial setmode.➁ Push [t] one or more times until“SC” appears.➂ Push [Y]/[Z] to select the desiredscan resume condition.• Pause scan: when receiving a signal,scan pauses on the signal until it dis-appears, then resumes.Timer scan: when receiving a signal,scan pauses on the signal for 10 sec.,then resumes.➃ Turn power off, then on again to exit initial set mode.USING INITIAL SET MODEPausescanReceivinga signalTimerscan10 sec.2 sec.Pause scanTimer scanMR01.12.5 4:31 PM Page 24 (1,1)