Icom IC-V8 Instruction Manual
Also see for IC-V8: Instruction manualService manualService manualInstruction manual
                                                                    | |
Contents
| 
245REPEATER OPERATION Auto repeaterfunction (USA version only)The USA version automatically activates the repeater settings (du-plex, ON/OFF, duplex direction, tone encoder ON/OFF) when theoperating frequency falls within or outside of the general repeateroutput frequency range. The offset and repeater tone frequenciesare not changed by the auto repeater function, reset these fre-quencies, if necessary.q While pushing [Y]+[Z], turn the power ON to enter INITIAL SETMODE .w Push [Y]/[Z] several times until“RPt.” appears.e Rotate [VOL] to select the desiredcondition.• “OF”—the auto repeater function isturned OFF;“R1”—the auto repeater function acti-vates for duplex only;“R2”—the auto repeater function acti-vates for duplex and tone.r Push [#•ENT ] to exit INITIAL SETMODE .USING INITIAL SET MODEFrequency range and offset directionFREQUENCY RANGE DUPLEX DIRECTION145.200–145.495 MHz “–” appears146.610–146.995 MHz147.000–147.395 MHz “+” appearsSKIPAOLMMRF TX755025DSKIPAOLMMRF TX755025DSKIPAOLMMRF TX755025D |
Related manuals for Icom IC-V8
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine