Icom IC-V8 Instruction Manual

Also see for IC-V8: Instruction manual Service manual Service manual Instruction manual

Icom IC-V8 Instruction Manual Manual pdf 52 page image

4310 PAGER/CODE SQUELCH‘‘ Pager operationD Calling a specific stationq Program the desired code channel in advance (p. 41).w Set the operating frequency.• Set the AF and squelch to the desired level as in normal operation.e Push [✱•OPTION] after [A•FUNC] is pushed.• Pager mode is selected.• 100 MHz digit shows “P.”r Select the desired transmit code channel:➥ Push [8•SET] after [A•FUNC] is pushed.➥ Rotate [VOL] to select the desired code channel.➥ Push [#•ENT ] to return to previous condition.t Push [PTT] to transmit the pager code.y Wait for an answer back.• When the transceiver receives an answer back code, the functiondisplay shows the other member’s ID or group code.u After confirming a connection push [✱•OPTION] after [A•FUNC] ispushed to select the code squelch operation, or repeat the pre-vious key operation again to select non-selective calling system.• DO NOT push any digit keys while code channels C0 to C6 are dis-played, or code channel contents be changed.i Communicate with the other party as normal: push [PTT] totransmit; release to receive.Optional UT-108 requiredMRF TX