Icom IC-V8 Instruction Manual
Also see for IC-V8: Instruction manualService manualService manualInstruction manual
                                                                    | |
Contents
| 
4611OTHER FUNCTIONS‘‘ Set modeDD Entering set modeq Push [8•SET] after [A•FUNC] is pushed.w Push [∫] or [√] to select the desired item.e Rotate [VOL] to select the condition/value.• To exit set mode, push [#•ENT ].DD Repeater tone frequencySelects tone encoder frequency for accessinga repeater, etc. from one of 50 available fre-quencies.• 67.0–254.1 Hz (50 tones): 88.5 Hz (default)DD Tone squelch frequencySelects frequency for tone squelch or pocketbeep operation from one of 50 available fre-quencies.• 67.0–254.1 Hz (50 tones): 88.5 Hz (default)DD DTCS codeSelects DTCS encoder/decoder code with po-larity (N: normal/I: inverse) from one of 208available codes.• 023N/I–754N/I: 023N (default)DD Offset frequencySets the offset frequency for duplex (repeater)operation within 0–20.00 MHz range.DD Reverse functionTurns the reverse function ON and OFF.• Default: OFFMRF TXMRF TXMRF D TXMRF TXMRF TX |
Related manuals for Icom IC-V8
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine