Icom IC-V8 Instruction Manual
Also see for IC-V8: Instruction manualService manualService manualInstruction manual
                                                                    | |
Contents
| 
256 MEMORY PROGRAMMING GeneralThe transceiver has 100 memory channels (plus 3 pairs of scanedges and 1 call channel) for storage of often-used frequencies.D Memory channel contentsThe following information can be programmed into the memory:• Operating frequency• Duplex direction (+ or –) with an offset frequency (pgs. 21, 22)• Subaudible tone encoder or tone squelch ON/OFF (pgs. 21, 35)• Subaudible tone and tone squelch frequencies (pgs. 22, 36)• Skip information* (p. 32)*Except for scan edge channels. Programming the memory/callchannelsq Push [D•CLR] to select VFO mode, if necessary.w Set the desired frequency.e Set other information such as tone, duplex, etc. as desired.r Push [C•MR] for 1 sec. (until 3 beeps emitted) after pushing[A•FUNC] to program the information into the displayed memorychannel and return to VFO• Continue to hold [C•MR] down for 1sec. after 3 beeps are emitted, to in-crement the displayed memory chan-nel number.MR |
Related manuals for Icom IC-V8
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine