Icom IC-V8 Instruction Manual

Also see for IC-V8: Instruction manual Service manual Service manual Instruction manual

Icom IC-V8 Instruction Manual Manual pdf 36 page image

276 MEMORY PROGRAMMINGD Memory/call ➾ call/memoryq Select the memory (call) channel to be transferred:Push [C•MR] ([B•CALL]) to select the memory (call) mode.Push [Y]/[Z] to select the memory channel.• When “dial” is assigned [VOL], rotate [VOL] to select the memorychannel. (p. 51)w Push [C•MR] momentarily after pushing [A•FUNC].• “--” and “X” flashes.e Push [Y]/[Z] to select the target memory.• When “dial” is assigned [VOL], rotate [VOL] to select the memorychannel. (p. 51)r Push [C•MR] for 1 sec after pushing [A•FUNC].• Memory mode is selected and the contents are transferred tothe target memory.D Clearing a memoryq Push [C•MR] after pushing [A•FUNC] to enter the memory trans-fer mode.• “X” and a memory channel number flash.w Push [Y]/[Z] to select the memory channel to be cleared.• When “dial” is assigned [VOL], rotate [VOL] to select the memorychannel. (p. 51)• The call channel cannot be cleared.e Push [C•MR] after pushing [A•FUNC] momentarily, then push[C•MR] for 1 sec after pushing [A•FUNC] again.• Perform this operation within 1.5 sec, otherwise the memory clear-ing is cancelled and the transceiver returns to the memory mode• The contents of the selected memory are cleared.r Push [D•CLR] to return to regular operation.