Icom IC-V8 Instruction Manual
Also see for IC-V8: Instruction manualService manualService manualInstruction manual
                                                                    | |
Contents
| 
266MEMORY PROGRAMMING Channel name programmingq Select a “Channel Name Indication” type in INITIAL SET MODE(pgs. 20, 51).w Push [C•MR] to select memory mode, if necessary.e Push [8•SET] after pushing [A•FUNC] to enter into the channelname programming mode.• The character to be edited flashes.r Rotate [VOL] to select a character.t Push [Y] to move to the right, [Z] to move to the left.• Up to characters can be used for channel name.• Usable characters are; A–Z, 0–9, ”space“, +, –, =, ✱, /, [, and ]y Push [#•ENT ] to fix and exit the channel name programmingmode. Memory transferringMemory (call) channel contents can be transferred to the VFO orto another memory channel.D Memory/call ➾ VFOq Select the memory (call) channel to be transferred:Push [C•MR] ([B•CALL]) to select memory (call) mode.Push [Y]/[Z] to select the memory channel.• When “dial” is assigned [VOL], rotate [VOL] to select the memorychannel. (p. 51)w Push [C•MR] for 1 sec. after pushing [A•FUNC] to transfer the se-lected memory contents to the VFO.• VFO mode is selected automatically. |
Related manuals for Icom IC-V8
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine