Icom IC-V8 Instruction Manual

Also see for IC-V8: Instruction manual Service manual Service manual Instruction manual

Icom IC-V8 Instruction Manual Manual pdf 64 page image

5512 CLONINGCloning allows you to quickly and easily transfer the programmedcontents from one transceiver to another transceiver; or, data froma PC to a transceiver using the optional CS-V8 CLONING SOFTWARE.D Transceiver-to-transceiver cloningq Connect the OPC-474 CLONING CABLE withadaptor plugs to the [SP] jack of the master and sub-trans-ceivers.• The master transceiver is used to send data to the sub-transceiver.w While pushing [A•FUNC] + [Y], turn power ON to enter cloningmode (master transceiver only— power ON only for sub-trans-ceiver).• “CLO N E” appears and the transceivers enter the clone standbycondition.e Push [PTT] on the master transceiver.• “CL” appears in the master transceiver’s display and two digit num-bers show that data is being transferred to the sub-transceiver.• “CL IN” appears automatically in the sub-transceiver’s display andtwo digit numbers show that data is being received from the mastertransceiver.r When cloning is finished, turn power OFF, then ON again to exitcloning mode.D Cloning using a PCPlease refer to the HELP file that comes with CS-V8 CLONINGSOFTWARE .NOTE: DO NOT push the [PTT] on the sub-transceiver duringcloning. This will cause a cloning error.AT POWER ON