46Remote control’s LCD screen:4.2.1 REMOTE CONTROL AND FIREPLACE SYNCHRONIZATION• Push button 1 (figure 4.2.1.b) completely to the right.• Remove a battery from the remote control (figure 4.2.1.a)• Press the PRG button (button 2 in figure 4.2.1.b). You will hear three beeps.• Place the battery back in the remote control. You will hear three beeps again.• Put button 1 (figure 4.2.1.b) back in the center position.• The remote control is now synchronized.• Press the ON/OFF button on the remote control to turn the fireplace on (figure 4.2.2.).CAUTION:The remote control and the receiver are radio frequency devices. Placing the receiver in or near metal mayconsiderably reduce the range of the signal.Figure 4.2.1.bFigure 4.2.1.a
