J. A. Roby SUROIT / RGV-25 Installation And Operation Manual

Also see for auster RGCG-25: Installation and operation guide

Contents

J. A. Roby SUROIT / RGV-25 Installation And Operation Manual Manual pdf 65 page image

658.5.2 8.5.2 BACK THERMAL INSULATION PANEL INSTALLATIONScrews are already in place and include withyour appliance. Untighten it not completely.Two groves are cut into the tabs to insert iteasily.Put the tab behind the bottom frame andalign the screws into the grooves and tighten itenough to keep in place the thermal insulationpanel (Figure 8.5.2)8.6 PLACEMENT OF EMBER GLASS ON THE BURNEREmber glass is provided with your device. Always wear gloves to prevent cutting yourself on the glass. Afterhandling ember glass, carefully wash your hands with soap and water to remove all traces of glass.• Remove the frame of the window. Refer to section 8.3.1 REMOVING THE DOOR• Carefully open the bag containing the ember glass.• Spread ember glass carefully on top of the burner. Use the entire bag and distribute it evenly over the entiresurface of the burner so as to cover the entire plate and grooves.9. MAINTENANCE9.1 PRECAUTIONA certified technician should perform the annual inspection and maintenance of your fireplace in addition to thegeneral installation of the fireplace and vent system to keep everything up and running safely. The gas intakeshould be cut and the fireplace should be completely cool during any maintenance. All parts of equipment thatare set aside for maintenance must be secured before the next use.WARNING:The proper positioning of ember glass is essential to good and safe operation of the appliance. Ember glassmust be distributed evenly over the burner. Do not add additional ember glass, ornaments or vermiculite. Useonly the amount of ember glass provided with the appliance.Figure 8.5.2WARNING:For optimal combustion, you must spread the mandatory required amount of ember glass (2 cups) on the burner.