18AVRMaking ConnectionsConnect the Trigger OutputIf your system has equipment that can be controlled by a DC trigger signal, connect it tothe AVR’s Trigger Out connector with a mono 1/8-inch (3.5mm) mini-plug interconnectcable. The AVR will supply a 12V DC (100mA) trigger signal at this connection wheneverit is powered on.AVRDevice withTrigger In ConnectorMono 1/8-inch (3.5mm)Mini-Plug Interconnect(not supplied)Connect to AC PowerAVR 101IN:Connect the supplied AC power cord to the AVR’s AC Input connector and then to aworking, non-switched AC power outlet.AC PowerOutletAVRAC InputConnectorPower Cord (supplied)
