7Changing Cooking Function SettingsTo Change Temperature or Cook Time After the CookingProcess Has Been Started:1. Press START to increase the cook time. Each press willincrease the time by 1 minute.2. Press the “up” or “down” buttons to toggle betweenchanging the Temperature or Cook Time. The selected settingwill be highlighted.3. Press OK when the setting you want to edit is selected on thedisplay.The current time or temperature setting will flash.4. Press the “up” or “down” buttons until the desired cook timeor temperature is displayed, then press OK again to confirm.The oven will automatically continue with the new settings.5. Press BACK to return directly to the last setting you changed.OVEN USEOdors and smoke are normal when the oven is used the first fewtimes, or when it is heavily soiled.During oven use, the heating elements will not remain on, but willcycle on and off throughout oven operation.IMPORTANT: The health of some birds is extremely sensitive tothe fumes given off. Exposure to the fumes may result in death tocertain birds. Always move birds to another closed and well-ventilated room.Aluminum FoilIMPORTANT: To avoid permanent damage to the oven bottomfinish, do not line the oven bottom with any type of foil or liner.■ For best cooking results, do not cover entire wire shelf withfoil because air must be able to move freely.■ To catch spills, use the baking/drip tray provided with youroven.Positioning Wire Shelf, Trays and BakewareIMPORTANT: To avoid permanent damage to the stainless steelfinish, do not place food or bakeware directly on the oven door orbottom.WIRE SHELF AND TRAYS■ Position wire shelf and trays before turning on the oven.■ Do not change rack positions of wire shelf and trays withbakeware on them.■ Make sure wire shelf and trays are level.BAKEWARETo cook food evenly, hot air must be able to circulate. Allow2" (5 cm) of space around bakeware and oven walls.Water ContainerThe water container is located behind the oven door and isaccessible once the oven door is opened.IMPORTANT: Empty and replace the water container after eachuse to keep condensation from building up inside the oven. See“Accessories” in the “General Cleaning” section for informationon cleaning the water container.Use only fresh tap water or still bottled water. Fill water containerwith tap water to the “MAX” mark.IMPORTANT: Do not use distilled water, or other liquids, in thewater container.To Remove the Water Container:Slowly lift and pull the water container out of its compartmenttoward you, keeping it horizontal to allow the remaining water todrain out of the valve seat.To Replace the Water Container:With the water container filled, position it in the water containercompartment, then push toward the back of the oven until itengages the contact point and is firmly seated in place.1234