Jenn-Air PRO-STYLE JGR8890ADP14 Use & Care Manual

Also see for Pro-Style JGR8890ADP: Use & care guide

To cancel the Clock display:If you do not want the time of day to display:Press and hold the upper CANCEL andClock pads for three seconds. The time of daywill disappear from the display.CANCEL..................... /jr ...........ClockWhen the clock display is canceled, press the Clock pad tobriefly display the time of day.To restore the Clock display:Press and hold tile upper CANCEL and Clock pads for threeseconds. The time of day will reappear in the display.TimerEach timer can be set from one minute (00:01) up to 99 hoursand 59 minutes (99:59).The timers can be used independently of any other ovenactivity. They can also be set while another oven function isoperating.The Timers do not control the oven.To set the Timer 1 or 2:1. Press the TIMER 1 or 2 pad."TIMER1On/Off,\ /• 00:00 and TIMER 1 or 2 flash in the display.Press the appropriate number pads until the (/uvmKZon/ Off )correct time appears in the display. - .............. J• TIMER 1 or TIMER 2 will be displayed. If both timers areactive, TIMER 1 and TIMER 2 will be displayed.• The colon and TIMER 1 and/or 2 will continue to flash.Press TIMER pad again or wait four seconds.• The colon stops flashing and the time beginscounting down.• The last minute of the timer countdown will be displayedin seconds.4. At the end of the set time, one long beep will sound and"End" will be displayed.5. Press the TIMER pad to clear the display.To cancel the Timer:1. Press and hold the corresponding TIMERpad for three seconds.OR2. Press the TIMER pad and press '0' usingthe number pads.Locking the Controland Oven DoorsTIMER1 ", On / OffjJ/ TIMER2The touchpad and oven doors can be locked for safety,cleaning, or to prevent unwanted use. The touchpads will notfunction when locked.If the oven is currently in use, the touchpads and doorscannot be locked.The current time of day will remain in the display when thetouchpads and doors are locked.To lock both doors: j .........1. Press and release CANCEL pad. CANCEL2. Press and hold the upper CANCEL and .............Cook & Hold pads for three seconds. ..................................,/ Cook & '° OFF appears in thedisplay ', Hold /• LOCK flashes while the doors are locking. ".............Both oven doors lock. LOCK remains in the display.To unlock both doors:Press and hold the upper CANCEL and Cook & Hold padsfor three seconds. OFF disappears from the display and LOCKflashes while the doors are unlocking.Important: The touchpads and oven doors cannot be lockedif the oven temperature is 400° F or above.Fault CodesBAKE or LOCK may flash rapidly in the display to alert you ifthere is an error or a problem. If BAKE or LOCK flash in thedisplay, press the CANCEL pad. If BAKE or LOCK continue toflash, disconnect power to the appliance. Wait a few minutes,and then reconnect power. If the flashing still continues,disconnect power to the appliance and call an authorizedservicer.Adjusting Sound LevelThe factory default setting for sound is medium (IVIEd),but itcan be changed to low (LO) or high (HI).To change the setting:1. Press and hold Delay and upper CANCEL pads for threeseconds. A beep will sound. "bEEP" and the current soundlevel ("LO", "MEd" or "HI") will appear in the display.2. Press the Autoset pad to increaseor decrease the soundlevel.3. Wait four seconds and the new setting will be accepted.4. If the Autoset pad is not pressed within 30 seconds, thecontrol will return to the existing setting.Changing Temp °F/°CThe factory default setting for temperature is Fahrenheit.To change the setting:1. Press and hold the upper oven Bake and upper CANCELpads for three seconds. A beep will sound and the currentsetting °F or °Cwill appear in the display.2. Press the Autoset pad to change the setting between °Fand °C. Cont.13