Jenn-Air PRO-STYLE JGR8890ADP14 Use & Care Manual

Also see for Pro-Style JGR8890ADP: Use & care guide

Oven WindowsTo protect the oven door window:1. Do not use abrasive cleaning agents such as steel woolscouring pads or powdered cleansers as they may scratchthe glass.2. Do not hit the glass with pots, pans, furniture, toys, orother objects.3. Do not close the oven door until the oven racks are inplace.Scratching, hitting, jarring or stressing the glass may weakenits structure causing an increased risk of breakage at a laterdate.Upper and Lower Oven LightsTo assure the proper replacement bulb is used, order bulb fromJenn-Air. Call 1-800-JENNAIR (1-800-536-62471,To replace oven light bulbs:1. Disconnect power to the range.2. When oven is cool, use fingertips to grasp edge of bulb cover.Pull out and remove.3. Carefully remove old bulb by pulling straight out of ceramicbase.4. To avoid damaging or decreasing the life of the new bulb, donot touch the bulb with bare hands or fingers. Hold with acloth or paper towel. Push new bulb prongs straight into smallholes of ceramic base.5. Replace bulb cover by snapping into place.6. Reconnect power to range. Reset clock.Leveling LegsBe sure the range is leveled when installed. Ifthe range is not level, turn the leveling legs, I _located at each corner of the range, untilrange is level. , _,,JJ_ ANTI-_BRACKET_ LEVELING LEGElectrical ConnectionAppliances which require electrical powerare equipped with a three=pronggrounding plug which must be pluggeddirectly into a properly grounded three-hole 120 volt electrical outlet.Always disconnect power to appliance before servicing.The three-prong grounding plug offers protection againstshock hazards. DO NOT CUT OR REMOVE THE THIRDGROUNDING PRONG FROM THE POWER CORD PLUG.If an ungrounded, two-hole or other type electrical outlet isencountered, it is the personal responsibility of theappliance owner to have the outlet replaced with aproperly grounded three=hole electrical outlet.Removal of Gas ApplianceGas appliance connectors used to connect this appliance tothe gas supply are not designed for continuous movement.Once installed, DO NOT repeatedly move this gas appliancefor cleaning or to relocate. If this appliance has to be movedand/or removed for servicing, follow the procedure describedin the installation instructions. For information, contactJenn-Air Customer Service at 1-800-JENNAIR(1-800-536-62471.To prevent range from accidentally tipping, range must besecured to the floor by sliding rear leveling leg into theanti-tip bracket.8