194A.2 Customer Parameter ValuesPara. Name CustomerValueUnitLF.02 Steering/Operating ModeLF.03 Drive confi gurationLF.04 Drive ModeLF.05 Auto ResetLF.08 Electronic Mtr ProtectionLF.09Electronic Mtr ProtectionCurrent ALF.10 Rated Motor Power hpLF.11 Rated Motor Speed rpmLF.12 Rated Motor Current ALF.13 Rated Motor Frequency HzLF.14 Rated Motor Voltage VVoltage Constant keLF.15 Power Factor -LF.16 Field Weakening Speed rpmLF.17 Rated Motor Torque lb ftLF.18 Motor Resistance ohmsLF.19 Motor Inductance mHLF.20 Contract Speed ft/minLF.21Traction SheaveDiameter inchesLF.22 Gear Reduction Ratio -LF.23 Roping Ratio -LF.24 Load lbLF.27 Encoder Pulse Number pprLF.28 Swap Encoder Channels -LF.29 Sample rate for encoder mSLF.30 Control Mode -A.LF.31 KP Speed (accel) -d.LF.31 KP Speed (decel) -P.LF.31KP Speed (Synth. Pre-Torque) -A.LF.32 KI Speed (accel) -d.LF.32 KI Speed (decel) -P.LF.32KI Speed (Synth. Pre-Torque) -A.LF.33 KI Speed Offset (accel) -Para. Name CustomerValueUnit0.LF.36 Maximum Torque lbft1.LF.36 Max.Torq. (emergency) lbftLF.37 Low Speed Torque Boast %LF.38 Switching Frequency -LF.41 Leveling Speed ft/minLF.42 High Speed ft/minLF.43 Inspection Speed ft/minLF.44 High Leveling Speed ft/minLF.45 Intermediate Speed 1 ft/minLF.45 Intermediate Speed 2 ft/minLF.45 Intermediate Speed 3 ft/min0.LF.50 Start Jerk ft/s30.LF.51 Acceleration ft/s20.LF.52 Acceleration Jerk ft/s30.LF.53 Deceleration Jerk ft/s30.LF.54 Deceleration ft/s20.LF.55 Approach Jerk ft/s31.LF.50 Start Jerk ft/s 31.LF.51 Acceleration ft/s 21.LF.52 Acceleration Jerk ft/s 31.LF.53 Deceleration Jerk ft/s31.LF.54 Deceleration ft/s21.LF.55 Approach Jerk ft/s32.LF.50 Start Jerk ft/s32.LF.51 Acceleration ft/s22.LF.52 Acceleration Jerk ft/s32.LF.53 Deceleration Jerk ft/s32.LF.54 Deceleration ft/s22.LF.55 Approach Jerk ft/s3LF.56 Stop Jerk ft/s 3LF.57 Speed Following ErrorLF.58 Speed Difference %LF.59 Following Error Timer secLF.61 Emergency Power Mode -LF.67 External Pre-torque Gain -
