ABT-BA-e-1312 238.2.1 Setting the time for Clock-CALPress the [CAL] key repeatedly until "SettinG" appears.Press the [TARE] key. The display shows “CAL dEF”.(for setting 1)Press the [CAL] key repeatedly until “tCAL t*” appears:Actuate the [TARE] key until "t*HH:MM" is displayed. The *-position symbolises a number between 1 and 3 (3 set times forautomatic adjustment). The currently set time is displayed in"HH:MM" (HH for hours, MM for minutes) format with the first digiton the left flashing. The time appears as “_ _:_ _” when no time isset. The symbol, and the # symbol appear to indicate it is inthe numerical input status.Pressing the [PRINT] key moves the blinking digit to the next digitto the right. Press the [UNIT] key to change the value of the blink-ing digit. When the [UNIT] key is pressed, the numerical of theblinking digit increases by 1 at a time. The numerals progress inthis order: 0→1→2→...→9→_→0... Set the hours within the rangeof 00 to 23 and the minutes within the range of 00 to 59. Completeyour setting by pressing the [TARE] key. The display returns to “tCAL t*”.In order to set another time, press the [CAL] key to move to thenext “t CAL t*” setting and set the time in the same way.Actuate the [ON/OFF] key repeatedly. Return to menu/weighingmode.Clearing the SettingsThe clock settings “tCAL t1” to “tCAL t3” may each be reset byusing procedure 3 to set the time setting to “_ _:_ _”.PSC and Clock-CAL may be turned on and off separately. The setting control display (see ch. 12.6)shows the weight symbol ( ), when PSC or Clock-CAL or both functions are activated.