ABT-BA-e-1312 6915.5.4 Stop bit settings1. The display changes from “io.S:****” to “S-S1”. Pressing the [CAL] key changes thedisplay. The standstill display ( ) marks the current setting.Display during setting S-S1 S-S2Setting specifics Stop bit, 1 bit Stop bit, 2bit2. Confirm your desired setting by pressing the [TARE] key.3. To return to "io.S:****", press the [ON/OFF] key.15.5.5 Input-output data format settings1. The display changes from "io.F:****" to " F-dF1". Pressing the [CAL] key changesthe display. The standstill display ( ) marks the current setting.Display during setting F-dF1 F-dF2 F-dF3 F-dF4Setting specificsData format 1.Standard formatData format 2.Not documentedData format 3.Not documentedData format 4.Not documented2. Confirm your desired setting by pressing the [TARE] key.3. To return to "io.F:****", press the [ON/OFF] key.Note: When set to data format 2, the balance will always send a process resultagainst commands from the computer.15.5.6 Handshake settings1. The display changes from "io.H:****" to " H-oFF". Pressing the [CAL] key changesthe display. The standstill display ( ) marks the current setting.Display during setting H-oFF H-Soft H-HArd H-trSetting specifics No handshake SoftwarehandshakeHardwarehandshakeTimerhandshake2. Confirm your desired setting by pressing the [TARE] key.3. To return to "io.H:****", press the [ON/OFF] key.