KERN ABT series Operating Instruction

Also see for ABT 100-5M: Operating instructions Operating instruction Operating instructions

Contents

ABT-BA-e-1312 57Repeatedly press the [UNIT] key until the balance is in densitydetermination mode for solids ",d". Note that “g” also appears dur-ing weight measurement in air.Press the [TARE] key. Place the item to be measured on theweighing pan.When standstill control is complete, press the [CAL] keyPlace the item to be measured on the immersed hanging weighingpan. The display is showing the density of the measured item.“dSP oL” may be displayed when nothing is on the weighing pan,which is normal.14.3.2 Determining density of liquidsCondition: Function "d" (density of liquids) is activated. See Chapter 11.3.Press the [CAL] key repeatedly until "SettinG" appears.Press the [TARE] key.Repeatedly actuate the [CAL] key until "Sv SEt" appears(Example)Press the [TARE] key. The currently set density for the body to beimmersed appears. In the upper part of the display panel, thesymbol and the # symbol appear in order to indicate numer-ical input status. The leftmost digit blinks.(Example)Enter density for your body to be immersed. When the [UNIT] keyis pressed, the numerical of the blinking digit increases by 1 at atime. You can determine the value of the flashing digit, or shift theflashing digit by one position to the right, by pressing the [PRINT]key. Confirm your setting by pressing the [TARE] key.Repeatedly press the [ON/OFF] key until the balance is in weigh-ing mode.