Kemppi FastMig X 450 Operating Manual

Also see for FastMig X 450: Quick guide Quick guide Service manual

EN4.2.3 Shortcut buttonsThere are three shortcut buttons on the control panel that you can use to display importantinformation on screen.• F1 (CHANNEL INFO) displays the basic data recorded to the displayed channel.• F2 (USER) displays the selected active user and allows a new user profile activation.• F3 (WF#) displays active and selected wire feeder and allows a new wire feeder selection.NOTE! FastMig X 450 allows up to 3 wire feeders to be connected to one power source. Only onewire feeder can be active at any one time and must be selected before it will operate.4.2.4 Creating the first memory channelIf you are starting a new FastMig X 450 that contains no memory channels, follow these stepsto create the first memory channel.1. Power on the machine from the main switch. You may need to press the control panel's PowerOn button for 5 seconds to activate the X 37 control panel.2. An empty memory channel appears. Press the NEW soft key.3. With Create New selected, press SELECT soft key.4. Select the desired welding process and other welding parameters.• Use up and down arrow buttons to move around in the menus• Approve selections by pressing the SELECT soft key.5. When you have made all settings , press SAVE soft key to store the settings in the activememory channel.4.2.5 Creating the first MMA/CC/CV memory channelIf you are starting a new FastMig X 450 that contains no MMA/CC/CV memory channels, followthese steps to create the first MMA/CC/CV memory channel.1. Press MENU button to display the main menu.2. With up and down arrows, browse to MMA/CC/CV Mode (7/7) and press SELECT.• MMA/CC/CV Mode view appears3. With the adjustment knob, select ON and press SELECT.• An empty MMA/CC/CV memory channel appears.4. When an empty MMA/CC/CV memory channel appears, press NEW soft key.5. With Create New selected, press SELECT soft key.6. Select MMA, CC or CV and and other parameters.7. When you have made all settings, press SAVE soft key to store the settings in the activememory channel.4.2.6 Creating and modifying memory channels1. Press MENU button to display the main menu.2. With Edit Channel selected, press SELECT.3. Select the channel number to be changed and press SELECT.• Use up and down arrow buttons to browse the displayed channel numbers.• Use Channel Info (F1) button to see the show the settings of the displayed channel.• To create a new channel, select a channel that is marked (Empty).4. Browse the menu to select the desired options and parameters.• Use up and down arrow buttons to move around in the menus.• Approve selections by pressing the SELECT soft key.• See the welding parameters and functions section of this manual.5. When you have made all settings, press SAVE soft key to store the settings in the selectedmemory channel number.When you have created a memory channel, the system is ready to weld. You select the desiredmemory channel number on wire feeder's control panel, set the welding power and arc lengthand start welding.13© Kemppi Oy / 1312