EN2. INSTALLATION2.1 Before useThe product is packed in specially designed transport cartons. However, before use alwaysmake sure the products have not been damaged during transportation.Check also that you have received the components you ordered and the correspondinginstruction manuals. Product packaging material is recyclable.NOTE! When moving the welding machine, always lift it from the handle, never pull it from thewelding gun or other cables.Operating environmentThis machine is suitable for both indoor and outdoor use. Always make sure that the airflow to the machine is unrestricted. The recommended operating temperature range is–20…+40 °C.Please ensure you read the safety instructions concerning operating environments supplied inthis manual.2.2 Distribution networkAll regular electrical devices without special circuits generate harmonic currents intodistribution network. High rates of harmonic current may cause losses and disturbance tosome equipment.FastMig X 450This equipment complies with IEC 61000-3-12 provided that the short-circuit power Ssc isgreater than or equal to 5.5 MVA at the interface point between the user’s supply and thepublic suply network. It is the responsibility of the installer or user of the equipment to ensure,by consultation with the distribution network operator if necessary, that the equipment isconnected only to a supply with a short-circuit power Ssc greater than or equal to 5.5 MVA.FastMig X 4504