Kemppi FastMig X 450 Operating Manual

Also see for FastMig X 450: Quick guide Quick guide Service manual

ENDOUBLE PULSE MIGWFSpeed 0.7…25 m/min * Sets the wire feed speed.Changes by steps of 0.05, when WFSpeed < 5 m/min, and by 0.1, when WFSpeed > 5 m/minWFS-Max Sets the limit for maximum WFSpeedWFS-Min Sets the limit for minimum WFSpeedFineTuning -9…+9 Factory setting is 0( = curve point)Adjusts the base current of the curve (arc length) incertain limitsFineTuningMax -9…+9 Step: 0.5 Sets the limit for maximum arc lengthFineTuningMin -9…+9 Step: 0.5 Sets the limit for minimum arc lengthDynamics -9…+9 Factory setting is 0 Controls the short circuit behaviour of the arc. Thelower the value the softer the arc is. The higher thevalue the rougher the arc is.Pulse Current -10…+15% Factory settingis 0%Reduces (-) or raises (+) the pulse current of thecurveDPulseAmp 0.1…3.0 m/min Factory setting isCURVEAdjusts the amplitude of the WFSpeed by steps of0.1. Value comes from welding program.DPulseFreq 0.4…8.0 Hz Factory setting isCURVEAdjusts the frequency of the double pulse by steps of0.1. Value comes from welding program.WISEROOT+WFSpeed 1.5…8.0 m/min * Sets the wire feed speed.Changes by steps of 0.05, when WFSpeed < 5 m/min, and by 0.1, when WFSpeed > 5 m/minWFS-Max Sets the limit for maximum WFSpeedWFS-Min Sets the limit for minimum WFSpeedFineTuning -9…+9 Adjusts the base current of the curve (heat of thearc) within certain limits.FineTuningMax -9…+9 Step: 0.5 Sets the limit for maximum heat of the arcFineTuningMin -9…+9 Step: 0.5 Sets the limit for minimum heat of the arc* Different welding programs may further restrict the value range.MMA PROCESSESCurrent 14…450 A Welding currentCurrentMax 14…450 A Set the limit for maximum current valueCurrentMin 14…450 A Set the limit for minimum current valueArcForce -9…+9 Factory settingis 0Controls the short circuit behaviour of the arc. Thelower the value the softer the arc is. The higher thevalue the rougher the arc is.StartPower -9…+9 Factory settingis 0Adjusts arc ignition15© Kemppi Oy / 1312