Kenwood DPX593BT Instruction Manual

20 ENGLISHBLUETOOTH — ConnectionSupported Bluetooth profiles– Hands-Free Profile (HFP)– Advanced Audio Distribution Profile (A2DP)– Audio/Video Remote Control Profile (AVRCP)– Serial Port Profile (SPP)– Phonebook Access Profile (PBAP)Supported Bluetooth codecs– Sub Band Codec (SBC)– Advanced Audio Coding (AAC)– aptX codec (Qualcomm® aptX™) (for )Connect the microphoneBLUETOOTH®Adjust the microphone angleSecure using cord clamps(not supplied) if necessary.MIC (microphone input terminal)*Microphone(supplied) Rear panelCHANNEL EDIT*1 1 Turn the volume knob to select a category, then press the knob.2 Turn the volume knob to select a channel you want to lock, thenpress the knob.“L” appears in front of the channel number.3 Press and hold to exit.CHANNEL CLEAR*1 YES: Clears all the locked channels. ; NO: Cancels.TUNE START*2 ON: All qualified music channels in the SmartFavorite will startplayback from the beginning of the song. ; OFF: Cancels.SIGNAL LEVEL Shows the strength (NO SIGNAL/WEAK/GOOD/STRONG) of thecurrent received signal.BUFFER USAGE Shows the memory usage (0% to 100%) for Replay buffer.SXM RESET YES: Resets stored channel and lock setting to default. ; NO: Cancels.*1 Displayed only when [USER DEFINED] is selected.*2 Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later that supportsSmartFavorites.SiriusXM® Radio (for / / /)* For the location of the microphone input terminal/microphone input jack, refer to page 40.