Kenwood DPX593BT Instruction Manual

38 ENGLISH(For / / )How to remove the unit1 Fit the catch pin on the extraction keys into the holes onboth sides of the trim plate, then pull it out.2 Insert the extraction keys deeply into the slots on eachside, then follow the arrows as shown on the illustration.Do the required wiring.( 39)Dashboard ofyour carBend the appropriate tabs to hold themounting sleeve firmly in place.Installing the unit (in-dash mounting)When installing without the mounting sleeveAlign the holes in the unit (on both sides) with the vehiclemounting bracket and secure the unit with screws (supplied).* For / / :Remove the mounting sleeve and trim plate from the unitbefore installing.Use only the specified screws. Using wrong screws mightdamage the unit.INSTALLATION/CONNECTION(For / / )Installing in Toyota carsInstall onto the car brackets using screws (F) or (G) (supplied). Use the mounting holes ( ) or ( ) that fit thecar brackets. Then, install the supplied trim plate (C).Do the required wiring.( 39)Dashboard of your carCar bracket