Kenwood DPX593BT Instruction Manual

44 ENGLISHSPECIFICATIONSTunerFM Frequency Range / / // :87.9 MHz — 107.9 MHz (200 kHz space):87.5 MHz — 108.0 MHz (50 kHz space)Usable Sensitivity(S/N = 30 dB, Dev 22.5 kHz)8.2 dBf (0.71 μV/75 Ω)Quieting Sensitivity(S/N = 46 dB, Dev 40 kHz)17.2 dBf (2.0 μV/75 Ω)Frequency Response(±3 dB)HD Radio Broadcast: 20 Hz — 20 kHzConventional Broadcast: 30 Hz — 15 kHzSignal-to-Noise Ratio HD Radio Broadcast: 75 dB (STEREO)Conventional Broadcast: 64 dB (MONO)Stereo Separation (1 kHz) 40 dBAM Frequency Range 530 kHz — 1 700 kHz (10 kHz space)Usable Sensitivity(S/N = 20 dB)29 dBμ (28.2 μV)Frequency Response(±3 dB)HD Radio Broadcast: 40 Hz — 15 kHzSignal-to-Noise Ratio HD Radio Broadcast: 70 dB (STEREO)TROUBLESHOOTINGSymptom RemedyBluetooth®“DEVICE FULL” The number of registered devices has reached its limit. Retryafter deleting an unnecessary device.( 25, DEVICE DELETE)“N/A VOICE TAG” Make sure the same voice as the registered voice tag is used.“NOT SUPPORT” The connected phone does not support Voice Recognitionfeature or phonebook transfer.“NO ENTRY”/“NO PAIR” There is no registered device connected/found via Bluetooth.“ERROR” Try the operation again. If “ERROR” appears again, check ifthe device supports the function you have tried.“NO INFO”/“NO DATA” Bluetooth device cannot get the contact information.“HF ERROR XX”/“BT ERROR”Reset the unit and try the operation again. If this does notsolve the problem, consult your nearest service center.“SWITCHING NG” The connected phones might not support phone switchingfeature.