ENGLISH 27BLUETOOTH®Settings to use KENWOOD Remote applicationKENWOOD Remote application is designed to control the KENWOOD carreceiver’s operations from the iPhone/iPod (via Bluetooth or via USB inputterminal) or Android smartphone (via Bluetooth).Preparation:Install the latest version of KENWOOD Remote application on your devicebefore connecting. For more information, visit .1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table), thenpress the knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .Default: XXREMOTE APPSELECT Select the device (IOS or ANDROID) to use the application.IOS YES: Selects iPhone/iPod to use the application via Bluetooth or connected viaUSB input terminal. ; NO: Cancels.If IOS is selected, select iPod BT source (or iPod FRONT/iPod REAR/iPod USB if youriPhone/iPod is connected via USB input terminal) to activate the application.• The connectivity of the application will be interrupted or disconnected if:– You change from iPod BT source to any playback source connected via theUSB input terminal.– You change from iPod FRONT/iPod REAR/iPod USB source to iPod BT source.ANDROID YES: Selects Android smartphone to use the application via Bluetooth. ;NO: Cancels.ANDROID LIST* Selects the Android smartphone to use from the list.* Displayed only when [ANDROID] of [SELECT] is set to [YES].STATUS Shows the status of the selected device.IOS CONNECTED: You are able to use the application using theiPhone/iPod connected via Bluetooth or USB input terminal.IOS NOT CONNECTED: No IOS device is connected to use theapplication.ANDROID CONNECTED: You are able to use the application usingthe Android smartphone connected via Bluetooth.ANDROID NOT CONNECTED: No Android device is connected to usethe application.Listen to iPhone/iPod via BluetoothYou can listen to the songs on the iPhone/iPod via Bluetooth on thisunit.Press repeatedly to select iPod BT.• You can operate the iPod/iPhone in the same way as iPod/iPhonevia USB input terminal. ( 10)• If you plug in an iPhone/iPod to the USB input terminal whilelistening to iPod BT source, the source automatically change toiPod FRONT/iPod REAR/iPod USB. Press to select iPod BT ifthe device is still connected via Bluetooth.
