Kenwood DPX593BT Instruction Manual

30 ENGLISHAUDIO SETTINGSSPEAKER SIZE The frequency and slope settings are automatically set for the crossover ofthe selected speaker.FRONT SIZE 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/7×10: Selects according to the connected speakersize for optimum performance.TWEETER SMALL/MIDDLE/LARGE: Selects according to thesize range of the connected tweeter for optimumperformance. ; NONE: Not connected.REAR 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/7×10:Selects according to the connected speaker size for optimumperformance. ; NONE: Not connected.SUBWOOFER 6.5"/8"/10"/12"/15" OVER: Selects according to the connected speakersize for optimum performance. ; NONE: Not connected.X ' OVERTWEETER FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/10KHZ/12.5KHZ: Adjusts the crossover frequency forthe tweeter speaker.GAIN LEFT –8 to 0: Adjusts the output volume of the left tweeter.GAIN RIGHT –8 to 0: Adjusts the output volume of the right tweeter.FRONT HPF F - HPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/150HZ/180HZ/220HZ/250HZ: Adjusts thecrossover frequency for the selected speakers (highpass filter). ; THROUGH: All signals are sent to theselected speakers.F - HPF SLOPE –6DB/–12DB/–18DB/–24DB: Adjusts the crossoverslope.(Selectable only if a setting other than [THROUGH] isselected for [F - HPF FRQ].)F - HPF GAIN –8 to 0: Adjusts the output volume of the selectedspeaker.REAR HPF R - HPF FRQ(Refer FRONT HPF settings.)R - HPF SLOPER - HPF GAINSUBWOOFERLPFSW LPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/150HZ/180HZ/220HZ/250HZ:Adjusts the crossover frequency for the subwoofer(low pass filter). ; THROUGH: All signals are sent tothe subwoofer.SW LPF SLOPE –6DB/–12DB/–18DB/–24DB: Adjusts thecrossover slope.(Selectable only if a setting other than [THROUGH] isselected for [SW LPF FRQ].)SW LPF PHASE REVERSE (180°)/NORMAL (0°): Selects the phaseof the subwoofer output to be in line with thespeaker output for optimum performance.SW LPF GAIN –8 to 0: Adjusts the output volume of thesubwoofer.DTA SETTINGS For settings, 31, Digital Time Alignment settings.CAR SETTINGS• The following item is selectable only if [SUBWOOFER SET] is set to [ON] ( 29):– [SUB-W LEVEL]– [SUBWOOFER] of [SPEAKER SIZE]– [SUBWOOFER LPF] of [X ’ OVER]– [SUBWOOFER] of [DISTANCE] and [GAIN] in [DTA SETTINGS]• The following item is selectable only if a setting other than [NONE] is selected for[TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE]:– [TWEETER], [REAR HPF], [SUBWOOFER LPF] of [X ’ OVER]