25 | KDC-BT92SD English | 26Getting Started of BluetoothEasy pairing function1 Enter easy pairing modePress the [ ] button for at least 1 second.Any of the following is displayed depending onBluetooth device registration condition:– “Searching”: When registering a Bluetooth devicefor the first time.– “(Bluetooth device name)”: When a Bluetoothdevice has already been registered.– “Device Full”: When maximum of five Bluetoothdevices have already been registered.When registering a Bluetooth device for thefirst time (Registering a Bluetooth device)2 “Searching” is displayed.Search for the Bluetooth device.When search is completed, “Finished” is displayed.3 Select a Bluetooth device nameTurn the [VOL] knob and press it when thedesired item is displayed.4 “Confirm Device” is displayed.If “Pairing Success” is displayed, proceed to step 7.If “PIN code” is displayed, proceed to steps 5.If “*** NG” is displayed, press the volume knob.Proceed to steps 4.5 Input the PIN code1. Turn the [VOL] knob and press it when thedesired item is displayed.Select the digit.2. Turn the [VOL] knob to select the numbers,and then press the [VOL] knob.6 Transmit the PIN codePress the [VOL] knob for at least 1 second.If “Pairing Success” is displayed, registration iscompleted.When “Confirm Device” is displayed, confirmconnection with a Bluetooth device operation.7 The receiver is connected to a Bluetoothdevice, with “HF CONNECT” or “AUDIOCONNECT” displayed, and exits the easypairing mode.⁄• If an error code is displayed during paring, see Guide> (page 77).When a Bluetooth device has already beenregistered, or maximum of five Bluetoothdevices have already been registered/ selectinga Bluetooth device2 “(Bluetooth device name)” or “Device Full” isdisplayed.3 Select a Bluetooth device nameTurn the [VOL] knob.✍ To register a new Bluetooth device, select“Device Search”, then go to Bluetooth device for the first time>.4 Press the [VOL] knob.5 Select the profile for the device to connectTurn the [VOL] knob.✍ “HF” (HFP), “AUD” (A2DP), or “H&A” (HFP and A2DP)indicates the corresponding profile.6 Set up the Bluetooth device namePress the [VOL] knob.“✱H✱A (device name)”: The selected Bluetoothdevice is busy.“-H-A (device name)”: The selected Bluetoothdevice is on standby.“ “ (blank) (device name): The Bluetooth device isdeselected.✍ If a Bluetooth device is already selected, deselectit, and then select a different one.✍ “H” (HFP) or “A” (A2DP) indicates the correspondingprofile.7 Exit easy pairing modePress the [ ] button.Deleting the registered Bluetooth device2 “(Bluetooth device name)” or “Device Full” isdisplayed.3 Select a Bluetooth device nameTurn the [VOL] knob.4 Delete the selected Bluetooth devicePress the [VOL] knob for at least 2 seconds.SRC VOL 5 Turn the [VOL] knob and press it when thedesired item is displayed.Select “YES”.Registering from Bluetooth devices(Pairing)To make your Bluetooth device (cell-phone) usablewith this unit, you need to register it (pairing). Youcan register up to 5 Bluetooth devices to this unit.1 Turn on this unitPress the [SRC] button.2 Start registering this unit by operating theBluetooth device.By operating the Bluetooth device, register thehands-free unit or audio unit (pairing). Select“KENWOOD BT CD/R-6P1” from the list of foundunits.3 Enter a PIN codeInput the PIN code (“0000”) in the Bluetoothdevice.Check that registration is complete on theBluetooth device.✍ PIN code is set to “0000” as the default. You canchange this code. Refer to Code> (page 56).4 By operating the Bluetooth device, starthands-free connection.⁄• If there are 5 or more Bluetooth devices registered, youcannot register a new Bluetooth device.