17 | KDC-BT92SD English | 18USB and SD SettingYou can select following USB and SD Setting items.1 Select USB or SD source2 Enter Menu List modePress the [MENU] button.3 Turn the [VOL] knob and press it when thedesired item is displayed.Select “Settings”.4 Select the setting itemTurn the [VOL] knob and press it when thedesired item is displayed.Display Overview“Settings”“Skip Search” Sets the ratio of skip performed with Search> (page 13).“0.5%”/ “1%”/ “5%”/ “10%”( : Factory setting)5 Make a settingTurn the [VOL] knob to select a setting value,and then press the [VOL] knob.6 Exit Menu List modePress the [MENU] button for at least 1 second,and then press it again briefly.⁄• The setting of “Skip Search” in (page10) and that in and SD Setting> (page 17) arealways the same. Changing the setting of one reflectsthe other.• This operation is effective only for the files registered inthe database created with KENWOOD Music Editor.Skip SearchYou can scroll up or down according to the numberof the selected Search items so that you can quicklyswitch the display position.1 Select USB or SD source2 Enter File Search modePress the [MENU] button.Turn the [VOL] knob and press it when thedesired item is displayed.Select “Music” > item.3 Enter Skip Search modePress the [PRESET] button for at least 1 second.4 Search for musicOperation type OperationMove between items Turn the [VOL] knob.Select an item Press the [VOL] knob.Skip Search Press the [DISP] or [iPod] button.Keep pressing the button for 1 second orlonger skips songs at 10% irrespective ofthe setting.Sets the ratio of skipperformedPress the [4] or [¢] button.Return to previous item Press the [MENU] button.After this step, see step 4 of Search> (page 16)to select a song.Cancelling the Skip SearchPress the [PRESET] button for at least 1 second.⁄• This operation is effective only for the files registered inthe database created with KENWOOD Music Editor.• Set the ratio with “Skip Search” in (page 17).USB device/ SD card OperationFunction of remote controlDirect Music SearchSearching the music by entering the file number.1 Enter Direct Music Search modePress the [DIRECT] button on the remotecontrol.2 Enter the music numberPress the number buttons on the remotecontrol.3 Search the musicPress the [4] or [¢] button.Cancelling Direct Music SearchPress the [DIRECT] button.⁄• Direct Music Search cannot be performed during playingof “Music Editor” media, Random play, or scan play.
