18 | KDC-X494/ KDC-MP445U/ KMR-440UFunction settingiPod Settings25 Skip Search: “Skip Search” ➤ “0.5%”, “1%”, “5%”,“10%”Sets the ratio of skip performed with Search> (page 10).26 My Playlist Delete: “My Playlist Delete”Deletes the songs registered in My Playlist.Turn the Control knob to select “YES” and thenpress the [ENTER] button to delete My Playlist.AUX Settings27 Name Set: “Name Set” ➤ “AUX”, “DVD”,“PORTABLE”, “GAME”, “VIDEO”, “TV”Sets the display when switched to AUX source.Initial Settings28 Source Select Mode: “SRC Select” ➤ “1”, ”2”Sets the source selection method.29 Beep: “Key Beep” ➤ “ON”, “OFF”Setting the operation check sound (beep sound)ON/OFF.30 Built in AUX: “Built-in AUX” ➤ “ON”, “OFF”Sets whether to display AUX during sourceselection.31 CD Read: “CD Read” ➤ “1”, ”2”Sets the method for reading CD.When unable to play special format CD, set thisfunction to “2” to force playing. Note that somemusic CDs may be unplayable even when set to“2”.In addition, audio files cannot be played when setto “2”. Normally, keep this set to “1”.1 : Automatically distinguishes between audio filedisc and music CD when playing disc.2 : Forces playing as music CD.32 Favorite Delete: “Favorite Delete” ➤ Preset No.,”All”Deletes Favorite Preset Memory.Refer to (page 15).33 Built in Amp setting: “Built-in AMP” ➤ “ON”,“OFF”Selecting “OFF” turns off the built-in amplifier.Turning off the built-in amplifier improves thequality of the sound from Preout.34 Speaker Select: “Speaker Select” ➤ “OFF”,”5/4inch”, ”6x9/6inch”, ”O.E.M”Fine-tuning so that the System Q value is optimalwhen setting the speaker type as follows;Speaker type DisplayOFF “OFF”For 5 & 4 in. speaker “5/4inch”For 6 & 6x9 in. speaker “6x9/6inch”For the OEM speaker “O.E.M”35 Firmware Upgrade: “F/W Update #.##” ➤ “USB”,”CD”Upgrades the firmware.Selecting “YES” and then pressing [ENTER] buttonstarts upgrading the firmware.For how to update the firmware, access our website.http://www.kenwood.com/cs/ce/Demo Mode Settings36 Demo Mode: “DEMO Mode” ➤ “ON”, “OFF”Specifies whether to enable demonstration.
