Kenwood KDC-MP445U Instruction Manual

Also see for KDC-MP445U: Service manual Quick start guide Quick start guide

Kenwood KDC-MP445U Instruction Manual Manual pdf 34 page image

34 | KDC-X494/ KDC-MP445U/ KMR-440USelecting the Bluetooth device YouWish to ConnectWhen two or more Bluetooth devices have alreadybeen registered, you need to select the Bluetoothdevice you wish to use.1 Enter Bluetooth modePress the [FNC] button for at least 1 second.“BT MODE” is displayed.2 Enter Function setting modePress the [FNC] button.3 Select Bluetooth device selection modeThe item can be selected and determined asfollows.”Settings” ➜ “Phone Selection” (to select thecellphone) or “Audio Selection” (to select theaudio player)To select the item, turn the Control knob. Todetermine the item, press the [ENTER] button.“(name)” is displayed.4 Select the Bluetooth deviceTurn the Control knob.5 Set up the Bluetooth devicePress the [ENTER] button.‘✱(name)’ or ‘-(name)’ is displayed.“✱”: The selected Bluetooth device is busy.“-”: The selected Bluetooth device is on standby.“ “ (blank): The Bluetooth device is deselected.6 Exit Bluetooth modePress the [SRC] button.⁄• If a cell-phone is already selected, deselect it, and thenselect a different one.• If you cannot select a device using the audio player,connect the device with the audio player.3 Select Bluetooth device deletion modeThe item can be selected and determined asfollows.”Settings” ➜ “Detailed Settings” ➜ “DeviceDelete”To select the item, turn the Control knob. Todetermine the item, press the [ENTER] button.Device name is displayed.4 Delete the selected Bluetooth deviceTurn the Control knob to select desired devicename, and then press the [ENTER] button.5 Turn the Control knob to select “YES”, and thenpress the [ENTER] button.“Completed” is displayed.6 Exit Bluetooth modePress the [SRC] button.⁄• When a registered cell-phone is deleted, its Phone Book,log, SMS, and voice tag are also deleted.Deleting a Registered BluetoothdeviceYou can delete a registered Bluetooth device.1 Enter Bluetooth modePress the [FNC] button for at least 1 second.“BT MODE” is displayed.2 Enter Function setting modePress the [FNC] button.Displaying the Firmware VersionDisplay the version of the firmware of this unit.1 Enter Bluetooth modePress the [FNC] button for at least 1 second.“BT MODE” is displayed.2 Enter Function setting modePress the [FNC] button.3 Select Bluetooth Firmware update modeThe item can be selected and determined asfollows.”Settings” ➜ “Detailed Settings” ➜ “BT F/WUpdate”To select the item, turn the Control knob. Todetermine the item, press the [ENTER] button.The firmware version appears.4 Exit Bluetooth modePress the [SRC] button.⁄• For how to update the firmware, access our web site.www.kenwood.com/bt/information/Bluetooth SetupFunction of KCA-BT200 (Optional Accessory)