8|KDC-X494/ KDC-MP445U/ KMR-440UAudio Preset RecallRecalling the sound setup registered by Preset Memory> (page 8).1Select the sourcePress the [SRC] button.For how to select source item, refer to source selection> (page 4).2Enter Audio Control modePress the [AUDIO] button.3Select Audio preset memory modeThe item can be selected and determined asfollows.“Detailed Settings”➜“Audio Preset”To select the item, turn the Control knob. Todetermine the item, press the [ENTER] button.4Select the Audio Preset RecallTurn the Control knob to select “Recall”, andthen press the [ENTER] button.5Turn the Control knob to select “YES”, and thenpress the [ENTER] button.“Recall Completed” is displayed.6Exit Audio Control modePress the [] button for at least 1 second.Audio Preset MemoryRegistering the value setup by Audio Control.1Setup Audio ControlSetup the 2Enter Audio Control modePress the [AUDIO] button.3Select Audio preset memory modeThe item can be selected and determined asfollows.“Detailed Settings”➜“Audio Preset”To select the item, turn the Control knob. Todetermine the item, press the [ENTER] button.4Select the Audio Preset MemoryTurn the Control knob to select “Memory”, andthen press the [ENTER] button.5Turn the Control knob to select “YES”, and thenpress the [ENTER] button.“Memory Completed” is displayed.6Exit Audio Control modePress the [] button for at least 1 second.⁄•To use this function, this unit must be powered for morethan one hour.•Register 1 pair of Audio Preset Memory. You cannot registerby the source.•When you press the Reset, all the sources will be the settingvalue which is registered.•The following items can be registered.“Bass Center FRQ”, “Bass Level”, “Bass Q Factor”, “Bass EXT”,“Middle Center FRQ”, “Middle Level”, “Middle Q Factor”,“Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPFFront”, “HPF Rear”, “LPF SubWoofer”, “Subwoofer Phase”Audio Adjustments
