32 | KDC-X494/ KDC-MP445U/ KMR-440UBluetooth SetupRegistering Bluetooth deviceTo make your Bluetooth device (cell-phone) usablewith this unit, you need to register it (pairing). Youcan register up to five Bluetooth devices to this unit.When registering from Bluetooth devices1 Turn on the this unit.2 Start registering a unit by operating theBluetooth deviceBy operating the Bluetooth device, register thehands-free unit (pairing). Select “KCA-BT200” fromthe list of connected units.3 Enter a PIN codeInput the PIN code registered as mentioned in (page 33).Check that registration is complete on theBluetooth device.4 By operating the Bluetooth device, start hands-free connection.When registering from this unit1 Enter Bluetooth modePress the [FNC] button for at least 1 second.“BT MODE” is displayed.2 Enter Function setting modePress the [FNC] button.3 Select Bluetooth device registration modeThe item can be selected and determined asfollows.”Settings” ➜ “Detailed Settings” ➜ “DeviceRegist.”To select the item, turn the Control knob. Todetermine the item, press the [ENTER] button.Search for the Bluetooth device.When search is completed, “Finished” is displayed.4 Select the Bluetooth deviceTurn the Control knob to select desiredBluetooth device, and then press the [ENTER]button.5 Input the PIN codeOperation type OperationSelect the numbers. Turn the Control knob.Move to the next digit. Push the Control knob towards right.Delete the last digit. Push the Control knob towards left.6 Transmit the PIN codePress the [ENTER] button.If “Pairing Success” is displayed, registration iscomplete.7 Return to the device listPress the [ENTER] button.8 Exit Bluetooth modePress the [SRC] button.⁄• This unit allows up to eight digits to be input for a PIN code.If a PIN code cannot be input from this unit, it can be inputfrom the Bluetooth device.• If there are 5 or more Bluetooth devices registered, youcannot register a new Bluetooth device.• If the error message appears even though the PIN code iscorrect, try (page 32).Registering Special Bluetooth deviceAllow registration of a special device that cannot beregistered normally (pairing).1 Enter Bluetooth modePress the [FNC] button for at least 1 second.“BT MODE” is displayed.2 Enter Function setting modePress the [FNC] button.3 Select Special device registration modeThe item can be selected and determined asfollows.”Settings” ➜ “Detailed Settings” ➜ “SPCL DVCSelect”To select the item, turn the Control knob. Todetermine the item, press the [ENTER] button.4 Select a device nameTurn the Control knob to select desired devicename, and then press the [ENTER] button.If “Completed” is displayed, registration iscompleted.5 Go through the procedure of Bluetooth device> (page 32) and complete theregistration (pairing).Cancelling Bluetooth modePress the [FNC] button.⁄• If the device name is not in the list, select “Other Phones”.Function of KCA-BT200 (Optional Accessory)
